Achieving Ultimate Clarity in Marine Ecosystems: A Comprehensive Guide to AC AquaClean Professional SEAWATER SERIES Filter Media
Update time: 25-11-21 Views: 10
In the delicate world of marine and reef aquariums, water quality is everything. The purity of every single drop directly impacts coral polyp extension, fish vitality, and the overall balance of the micro-ecosystem. As a leading water treatment technology enterprise in China, AC AquaClean has developed the SEAWATER SERIES—a professional-grade filter media line specifically engineered for marine enthusiasts. Today, we present an in-depth analysis of this premium filtration solution that controls pollution at the source and maintains water parameters with precision.
The Core Challenges of Marine Aquarium Keeping: Phosphate and Organic Pollution
Unlike freshwater environments, marine aquariums demand extremely stringent phosphate (PO₄³⁻) control. When phosphate concentrations exceed 0.05ppm, nuisance algae such as diatoms and hair algae proliferate uncontrollably, not only shading coral photosynthesis but also inhibiting coral calcification. Simultaneously, organic pollutants from fish metabolism and decomposing food waste cause yellowing water, reducing light penetration. The AquaClean SEAWATER SERIES directly addresses these pain points with a comprehensive purification strategy from source to endpoint.
Core Product Portfolio: Seven-Tier Purification, Layered Protection
1. Marine-Spec Activated Carbon: Pure Adsorption, Zero Secondary Pollution
While conventional activated carbon adsorbs organics, it often leaches phosphates, becoming a "pollution source" itself. AquaClean Low-Phosphorus Marine Activated Carbon employs a special activation process, achieving an ultra-low phosphate leach rate of 0.0000013g/ml—virtually negligible. Its methylene blue adsorption value reaches 181mg/g, far surpassing industry standards, rapidly removing yellowing agents, medication residues, and organic toxins. The uniform 0.6-2.3mm granule size and optimized 0.55g/cm³ density ensure excellent water flow penetration without causing turbidity or pH fluctuations, making it the top choice for maintaining "air-glass" clarity in reef tanks.
Application Tip: Place in a filter bag; 500mL treats 400-600L of water. Replace monthly for optimal performance.
2. NP-Reducing Bio Pellets: Intelligent Carbon Source for Dual Nitrate & Phosphate Reduction
Simultaneous control of nitrates (NO₃) and phosphates in mature aquariums has always been challenging. AquaClean NP-Reducing Bio Pellets utilize biodegradable polymers that, when housed in an NP-Reactor with strong water flow, provide both "housing and food" (a carbon source) for aerobic heterotrophic bacteria. These bacteria consume the Bio Pellets as their carbon source while directly assimilating nitrogen and phosphorus from the water column to build biomass. As the biofilm thickens, an anaerobic layer forms internally, triggering denitrification that converts nitrates into nitrogen gas. Critically, bacteria-laden pellets are physically exported by the protein skimmer, achieving true "permanent removal" rather than temporary adsorption.
Performance Highlight: Under optimal conditions, 500mL Bio Pellets maintain NO₃<5ppm and PO₄<0.03ppm consistently.
3. Marine-Spec Bio Block: 3D Nitrification, Safe Foundation
Biological filtration relies on a stable nitrification system. AquaClean Marine-Spec Bio Block features an aluminum ion leach rate of only 0.005ppm (national drinking water standard is 0.2ppm) and a phosphate content of merely 0.0274%, completely eliminating concerns about media-induced pollution. The 10×10×4.5cm open-pore structure provides a massive surface area in three dimensions for nitrifying and denitrifying bacteria. Whether cycling a new aquarium or enhancing biological filtration in an established system, it consistently removes ammonia and nitrite, serving as the "cornerstone" for SPS/LPS coral tanks.
Flexible Sizing: Available in 1-pack and 2-pack configurations for customizable applications.
4. Phosphate Remover: Targeted Phosphate Removal, Efficiency Benchmark
When phosphate levels are already elevated, aggressive adsorption is required. AquaClean Phosphate Remover (available in Iron-Based and Aluminum-Based formulas) boasts a phosphate binding capacity of 1.99mg/g, outperforming most competitors under equivalent flow rates. Its high mechanical strength prevents pulverization even in high-flow circulation systems. Most importantly, it maintains phosphate levels below 0.03ppm long-term, inhibiting algae growth and promoting crystal-clear water. The uniform granules are regenerable and durable, offering an economical and eco-friendly solution.
Application Scenario: Spread directly in the sump or place in a filter bag—ideal for rapid control during algae outbreaks.
5. Activated Calcium Reactor Media: Precision Calcium Supplementation, Phosphate-Free
SPS corals consume vast amounts of calcium and alkalinity daily for skeletal growth. Activated Calcium Reactor Media undergoes advanced activation treatment, delivering 35% higher calcium dissolution efficiency than conventional media. Used with a calcium reactor and CO₂ system, it slowly dissolves to continuously release essential elements including calcium, magnesium, strontium, potassium, and carbonates. Laboratory testing confirms near-zero phosphate content, eliminating the common side effect of "calcium supplementation = phosphate supplementation." Dissolution rate is easily controlled by adjusting reactor flow rate and pH for stable, precise elemental replenishment.
Pro Tip: Rinse before use and pair with a pH controller for fully automated supplementation.
6. Reef Spec Magnesium Plus: Magnesium Balance Specialist for Enhanced Coral Coloration
Magnesium concentration directly impacts the calcium-alkalinity balance and coral fluorescent protein expression. AquaClean Reef Spec Magnesium Plus utilizes high-purity magnesium minerals with an advanced activation process, achieving magnesium release rates 6 times higher than traditional products. It rapidly elevates magnesium levels in new aquariums without introducing ammonia, chlorides, or sulfates, preventing ionic imbalance risks. When used with a calcium reactor, it synchronously maintains the three core parameters (Ca/Alk/Mg), resulting in expanded polyp extension and peak fluorescence in corals.
Advanced Application: Mix with Calcium Reactor Media at a 1:3 ratio to replicate natural seawater elemental ratios.
7. Activated Zeolite: Ammonia Zeroing in 24 Hours
Live rock and dead coral skeletons can continuously leach ammonia—a lethal threat to delicate corals. AquaClean Activated Zeolite undergoes special activation, achieving a surface area far exceeding natural zeolite and reducing ammonia to undetectable levels within 24-48 hours. It also efficiently chelates heavy metal ions including Zn²⁺, Cu²⁺, and Pb²⁺, providing a "heavy-metal-free" safe zone. Whether cycling a new tank or handling emergencies after fish losses, it serves as the ultimate "scavenger" in sumps or fluidized bed reactors.
Maintenance Key: Can be regenerated with brine when saturated to extend service life.
System Integration: Building a Full-Cycle Water Quality Management System
The true power of the AquaClean SEAWATER SERIES lies in synergistic effects:
- Pre-filtration: Activated Carbon + Zeolite → Remove organics and ammonia
- Biological Core: BioBlock → Establish stable nitrification
- Enhanced Reduction: NP-Reducing BioPellets → Deep denitrification and dephosphatation
- Targeted Removal: Phosphate Remover → Precise phosphate control
- Elemental Replenishment: Calcium Reactor Media + Magnesium Plus → Maintain mineral balance
This solution covers the entire chain from "physical adsorption → biological degradation → chemical adsorption → elemental supplementation," offering adaptable combinations for nano tanks to thousand-liter reef systems.
Brand Commitment: Professionalism Through Dedication
AquaClean's parent company, AC AquaClean, is headquartered in the Chuangzhi Future Industrial Park, Zibo, Shandong. Our ISO-grade production facilities and EN 62321 heavy metal detection certification ensure every batch meets stringent standards. We conduct phosphate, aluminum ion, and heavy metal leaching tests on all products. Beyond being a product supplier, we are marine aquaculture technology partners—offering 7×12-hour online water quality consultation through our AC Douyin flagship store, official WeChat account, and dedicated customer service channels.
